Thanks for visiting our wiki! Click here to order your own game server at SurvivalServers.com

ARK: Custom Launch Parameters

From Survival Servers
Revision as of 03:27, 16 April 2018 by ColeP (talk | contribs)
Jump to navigation Jump to search

If you want to customize your ARK PC server even further, you can do so by enabling the use of Custom Launch Parameters.

Setting a Server Up for Custom Launch Parameters

To setup a custom launch parameter on your server, do the following:

  1. In the Control Panel for your server, set the Map drop-down value to "Custom".
    Custom Launch Parameters Map.png
    This will add two new sections to the panel. Conversion ID and Launch Parameters Line.
  2. Click the (i) info button next to the launch parameter box to get your parameter line for the desired map.
    Custom Launch Parameters TheIsland.png
  3. Add the parameter line to the Launch Parameters Line textbox:
    Custom Launch Parameters Launch.png

If you have mods on your server or wish to modify your server by changing various parameters, you will also need to add these to your Launch Parameters Line.

Adding Mods

When you add mods to your server while using custom launch parameters, you will need to add them in both Mod ID(s) as well as Launch Parameters Line.

  1. At the end of the Launch Parameters Line, add ?GameModIDs=
  2. Copy and paste the contents from Mod ID(s) directly after the equals sign.
    Example using Structures+ and Resource Stacks 2.0
    Custom Launch Parameters ModsLaunch.png
  3. Click on the green button to save settings and restart the game server for the changes to take place.

Command Line Arguments

To change some behaviors on your server, you can do this by adding in command line arguments. List of Command Line Arguments

  1. Find a parameter that you wish to change, such as overriding the official difficulty. In the case of this example, we want wild dinos to have a max level of 300.
  2. In the Launch Parameters Line, add the following at the end:
    ?OverrideOfficialDifficulty=10.0
    Custom Launch Parameters Arguments.png
    NOTE: Dino Max Level = OverrideOfficialDifficulty * 30. (10 * 30 = 300)
  3. Click on the green button to save settings and restart the game server for the changes to take place. If you are modifying the dino levels, you will need to run a Destroy Wild Dinos command. For help on this, visit (add link here).

Custom Map for ARK

  1. Head to the Steam workshop area for ARK and locate the map you wish to use.
    Steam Workshop
  2. Once you find the map you will want to grab the Map ID located at the end of the URL of the specific mod. For an example, lets use Crystal Isles.
    Crystal Isles Workshop Page - https://steamcommunity.com/sharedfiles/filedetails?id=804312798
    Map ID = 804312798
  3. On the ARK control panel, look for the map ID box. If you have trouble locating it, you will need to switch the map to "Custom."

    Mapidbox.png

  4. Add the value shown above into the Map ID box.
  5. On the Launch Parameters Line box, add ?ModMapID=804312798 to the end of the parameter line.
    Custom Launch Parameters CrystalIsles.png
  6. Change TheIsland to CrystalIsles.
    Custom Launch Parameters CrystalIsles2.png
    NOTE: Most custom maps will list the map name on the Steam Workshop page along with the Map ID value.
  7. Once you have that fixed up simply hit the update/restart button at the bottom of the panel and let the server boot up fully.

Primitive+ or other Conversion Mods for ARK PC

  1. After setting the Map to "Custom", the Conversion ID box will be visible.
  2. Add the mod ID value for the conversion mod in this field.
    Ex: Primitive+
    Custom Launch Parameters PrimitivePlus.png
  3. Click on the green button to save settings and restart the game server for the changes to take place.


Share your opinion